Support

Blu-ray/DVD/CD Duplicator Controller

Following the development of the market, U-Reach developed various kinds of CD/DVD duplicator to fit customers' need. Each one of them has its own specific characters which helps customers to make the best choice, such as :

SATA Series

Target:4/7/11/15

Visual Identification:One layer green PCB control board

Characters:SATA series duplicator is the first one using DDR2 buffer memory which help to achieve high speed duplication and support 12xBD, 24xDVD, and 52x CD copy speed. Also Buffer from 128 to 512MB makes the duplication job more reliable and enhances the compatibility with different combination of optical drives and discs.

BD Series

Target:1 / 4 / 8 / 12

Visual Identification:Double layers green control boardBackend-located SATA ports

Characters:With separate digital and analog control board design, BD series duplicator eliminates any signal interferences. This approach greatly increases stability and success rate for high-speed duplication. In addition, the design of backend-located SATA ports help to meet the easy-assembling concept and greatly achieve the goal of elegant simplicity inside the duplicator.

SATA Series

Target:4/7/11/15

Visual Identification:One layer green PCB control board

Characters:SATA series duplicator is the first one using DDR2 buffer memory which help to achieve high speed duplication and support 12xBD, 24xDVD, and 52x CD copy speed. Also Buffer from 128 to 512MB makes the duplication job more reliable and enhances the compatibility with different combination of optical drives and discs.

Mostly we find the compatibility issue between optical drives and discs is the main factor affecting the result of duplication. To get better quality duplications, it is recommended that you:
  • 1. Make sure of the quality of the CD/DVD: the better the quality of the blank discs you use generally will give you better duplication results. A scratched Master disc or a disc with obvious physical damage may cause the duplication to fail.
  • 2. Make sure you have the correct type of CD/DVD: If the source disc is a copy-protected disc, the result of duplication may fail; Also, if the blank disc is not compatible with the source disc, such as a copy from a DVD to a CD, or from DVD9 to DVD5, the duplication may fail.
  • 3. Make sure the working environment is satisfactory: it is important to keep the duplicator in a clean environment. The fan on the rear of the duplicator should be kept clean and allowed enough space for air to flow.
  • 4. Make sure the reader or the burner is stable: the reader and burner are the key to a successful duplication job. So it is also important to select a qualified reader and burner for the duplicator.
  • 5. Make sure the duplicator is working with sufficient power supply.
U-Reach CD/DVD duplicator supports all sizes of CD/DVD discs, including mini discs. For the best duplication job, we strongly recommend you use qualified CD/DVD discs, and not to run duplication with different capacity discs.
U-Reach CD/DVD duplicator supports 12xBD, 24xDVD and 52xCD duplication. However, disc copy speed depends on the disc itself and the drive. If you use a blank BD disc which support only up to 8x , then the real copy speed can only reach up to 8x maximum.
The duplication speed corresponds with the speed of disc and drive. U-Reach CD/DVD duplicator can support 24xDVD. As for the most popular 16x DVD disc, it takes around 5-6 minutes to finish one round of DVD duplication with full 4.7GB data in the source.