The Copy Jet series is the entry level model which especially designed for users who simply need pure high quality duplicator. Following the consistent insists on user-friendly, high quality and performance, the Jet series will definitely satisfy most users on duplication job. With built-in four copy models, users can choose the best function fitting to realistic needs; bit by bit compare function can guarantee the integrity of data; format and erase functions contribute to the flash's accuracy and safety for duplication and security if it will be disposed.
Anyone who uses this duplicator for the first time will find that it is so easy to use without complex training. In addition, SD/MSD/USB interfaces for users to choose make the 6 series flash duplicator more competitive. If you purely need a simple flash duplicator to assist your daily job, the 6 series flash duplicator would be the best choice.
Multi-Core Processer Provies High Speed Mass Duplication
Each slot has independent and dedicated channel processor and therefore can supports up to 20MB/s per second bandwidth per port. Whether your target is one piece or 100 pieces;the copy speed (bandwidth) remains the same.
Source: 2G/FAT32, Data:119MB
*The copy speed and time will vary by the Flash's supported speed.
Targets
PC based Duplicator
U-Reach Duplicator
1 pcs
28 sec
18 sec
10 pcs
3"57sec
18 sec
20 pcs
15"01sec
19 sec
100 pcs
-
19 sec
U-Reach Flash duplicator rids itself the burden of PC, which is why we can offer you the best efficiency.
Bases on the above scenario, the U-Reach's USB duplicator with 32 ports provides 31 time higher performance than using a PC. This means tremendous saving on your production time and cost.
Quick Data Copy
Quick data copy function will analysis the data and copies only the data portion, there by enhancing the copy efficiency.
Copy + Compare Function
After making a copy, the bit-by-bit compare function guarantees the data copy integrity. It's a fast, reliable and convenient hardware-based solution.
þ
Professional H3/H5 Test completely shows the Flash cards’ quality. This tool exams the entire Flash media bit-by-bit to show the reading and writing speed and bad sector quantity. This is a useful tool before you make a purchasing decision or to make quality inspection of the Flash cards.
þ
Capacity check. The cpapcity check can report the accurate capacity of Flash card.
þ
Measure speed. The measure speed check can show the reading and writing speed of the Flash card.
Quick Format only need 2 seconds
You can select to format your USB/Memory card to be FAT16/32 with only 2 seconds.
Asynchronous Copy Technology
The asynchronous copy loads data to buffer memory automatically and allows each slot to Copy/Compare/ Erase/ Format data independently and continuously.
Unique Daisy Chain Technology
The unique daisy chain technology incorporates modular design and provides flexible expansion for up to hundreds of ports, which can cater to your specific production needs.
Features
1.
High speed copy supports up to 20MB per second per port.
2.
Apply new advanced Multi-Core processor.
3.
Completely standalone system, no computer required.
4.
Supports all format, data size and USB/memory card capacity with bit-by-bit copy.
5.
Quick data copy, copies only data contained areas. ( Support FAT16/32, Linux ext2/ext3, NTFS)
6.
2 second format, 3 models available for selection.
7.
User-friendly interface with real time information LCD display.
8.
Supports, Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
9.
Strict bit-by-bit hardware comparison further increases the reliability of duplication.
10.
Firmware upgradable with well-experienced team support.
Specification
Model
TF608
TF616
TF624
TF632
TF640
TF6XXX
Target
1:7
1:15
1:23
1:31
1:39
1:XXX
Buffer
256MB
Operation
Stand Alone
Support media
USB / SD / SDHC / microSD / MMC / miniSD
Display
2x20 Monochrome LCD display
LED
LED(Green/Red) on each slot
Input
4 push buttons ( Forward, Backward, OK, Esc)
Language Support
English, Chinese
Temperature
Working
5°C ~ 75°C
Storage
-20°C ~ 85°C
Humidity
Working
20%~80%
Storage
5%~95%
Power Supply
80W or up (depends on different type of system reqoirement);
support 110-220V full range power.
Safety
CE, FCC, RoHS
Marketing Download
The information present in this section is for marketing reference only. The actual specification may subject to change without notice.
Offering board range of professional Flash duplicator that duplicates USB, SD, MicroSD and CF with a speed of up to1.5GB per minutes per port and can support the duplicator up to hundreds port of for simple mass duplication. This duplicator is not only for duplicating but also it has powerful flash device diagnostic tools to detect flash quality, or allow many check ability such as real capacity, speed, and even formatting the device. If you are a flash device manufacturer, it is important to own a high efficient machine which can help you to reduce labor cost and increase productivity. U-Reach is the first one who can support duplicating all targets simultaneously with maximum 33MB/s. With an additional special log function, it can record every operation activity for production management purpose. If you are an organization who frequently loads your own data for any security reason, you need an easy and high quality machine to rely on. UREACH flash duplicator has very reliable and fast bit by bit compare function. When every time you do copy, you can execute "compare" function to make sure the content 100% correct.
Multi-Core Processer Provies High Speed Mass Duplication
Each slot has independent and dedicated channel processor and therefore can supports up to 1.5G per minute bandwidth per port. Whether your target is one piece or 100 pieces;the copy speed (bandwidth) remains the same.
Source: 2G/FAT32, Data:119MB
*The copy speed and time will vary by the Flash's supported speed.
Targets
PC based Duplicator
U-Reach Duplicator
1 pcs
28 sec
18 sec
10 pcs
3"57sec
18 sec
20 pcs
15"01sec
19 sec
100 pcs
-
19 sec
U-Reach Flash duplicator rids itself the burden of PC, which is why we can offer you the best efficiency.
Bases on the above scenario, the U-Reach's USB duplicator with 32 ports provides 31 time higher performance than using a PC. This means tremendous saving on your production time and cost.
Quick Data Copy
Quick data copy function will analysis the data and copies only the data portion, there by enhancing the copy efficiency.
Copy + Compare Function
After making a copy, the bit-by-bit compare function guarantees the data copy integrity. It’s a fast, reliable and convenient hardware-based solution.
Superior Flash Quality Inspection Tool
The quality, capacity and speed checks are useful and reliable tools to inspect the quality of the Flash cards you purchased.
þ
Professional H3/H5 Test completely shows the Flash cards’ quality. completely shows the Flash cards' quality.This tool exams the entire Flash media bit-by-bit to show the reading and writing speed and bad sector quantity. This is a useful tool before you make a purchasing decision or to make quality inspection of the Flash cards.
þ
Capacity check. The cpapcity check can report the accurate capacity of Flash card.
þ
Measure speed. The measure speed check can show the reading and writing speed of the Flash card.
Asynchronous Copy Technology
The asynchronous copy loads data to buffer memory automatically and allows each slot to duplicate data independently and continuously.
Unique Daisy Chain Technology
The unique daisy chain technology incorporates modular design and provides flexible expansion for up to hundreds ports, which can cater to your specific production needs.
Features
1.
High speed copy supports up to 1.5G per minute per port.
2.
Apply new advanced Multi-Core processor.
3.
Complete standalone system, no computer required.
4.
Supports all format, data size and USB/memory card capacity bit by bit copy.
5.
Comply with USA Department of Defense (DoD) data security standard provides DoD Erase function.
6.
4 kinds of profesional quality diagnostic tools for Flash module.
7.
" Capacity Check" shows accurate capacity of USB/Memory card to get rid of low quality or fake flash media.
8.
"Speed Check" shows Reading and Writing speed of the Flash module within 8 seconds .
9.
"H3/H5 Media Check" shows the quantity of bad block though bit by bit examination.
10.
Quick data copy, copies only data contained areas. ( Support FAT16/32, Linux ext2/ext3, NTFS)
11.
2 second format, 3 models available for selection.
12.
Supports Synchronous and Asynchronous modes for Copy/Compare/ Erase/ Format function.
13.
Strict bit-by-bit hardware comparison further increases the reliability of duplication.
14.
User-friendly interface with real time information LCD display.
15.
Firmware upgrade available with well-experienced team support.
Specification
Model
TF708
TF716
TF724
TF732
TF740
TF7XXX
Target
1:7
1:15
1:23
1:31
1:39
1:XXX
Buffer
256MB
Operation
Stand Alone
Support media
USB / SD / SDHC / microSD / MMC / miniSD / CF
Display
2x20 Monochrome LCD display
LED
LED(Green/Red) on each slot
Input
4 push buttons ( Forward, Backward, OK, Esc)
Language Support
English, Japanese, Chinese
Temperature
Working
5°C ~ 75°C
Storage
-20°C ~ 85°C
Humidity
Working
20%~80%
Storage
5%~95%
Power Supply
80W or up (depends on different type of system reqoirement);
support 110-220V full range power.
Safety
CE, FCC, RoHS
Marketing Download
The information present in this section is for marketing reference only. The actual specification may subject to change without notice.
